Sprinkler Corrosion Pump by Potter designed to
provide moisture free air to a -40 degree F dew point
in dry or preac-
tion sprinkler systems. A moisture-free environment
will reduce corrosive effects of MIC bacteria. The
air compressor is designed to fill the sprinkler
system
to 40 psig in accordance with NFPA 13, as well as
provide the higher pressure needed to allow
the twin tower regenerative air dryer to function
properly.
POTTER SPRINKLER CORROSION PUMP
Click link for Picture.
Potter_Pump_CDP
General Information
The Corrosion Dry Air Pak is a turnkey system designed to provide moisture free air to a -40 degree F dew point in dry or preac-
tion sprinkler systems. A moisture-free environment will reduce corrosive effects of MIC bacteria. The air compressor is de-
signed to fill the sprinkler system to 40 psig in accordance with NFPA 13, as well as provide the higher pressure needed to allow
the twin tower regenerative air dryer to function properly. Prior to entering the regenerative air dryer, an air cooled aftercooler
cools the compressor’s hot discharge air to a maximum 100 degrees F. A coalescing prefilter with a differential pressure gauge
removes oil vapor and other contaminants that can destroy the desiccant in the dryer towers. A combination particulate filter and
regulator prevents downstream migration of desiccant dust while regulating air pressure to the sprinkler system.
The Corrosion Dry Air Pak is controlled by one integrated control panel complete with a flow diagram display, 120 volt control
circuit with indicating lights for tower drying, drain valve activation and compressor operation, along with panel mounted hour
meter, separate drain valve duration and interval controls, drain valve on/off switch and panel control on/off switch. Four panel-
mounted pressure gauges are provided for receiver, outlet and drying tower pressures. Purge set pressure gauge is separately
mounted and conveniently located at the purge valve for ease of setting the purge flow.
All components are pre-piped, pretested, and pre-wired for ease of mechanical and electrical installation on site. Each unit in-
cludes a UL Listed, FM approved Air Maintenance Device.
All models include a CDP-TK Moisture Indicator Kit which is a self-contained device for visually monitoring moisture in air
streams. The media changes color in the presence of water vapor. When the media is blue, the air contains less than 20% mois-
ture (relative humidity). The media will change to pink when the moisture level in the air rises above 20% relative humidity.
The Corrosion Dry Air Pak comes fully charged with desiccant so that no on-site desiccant is required at start-up. Maintenance
kits, which include replacement filter elements (3) and 2 quarts of compressor oil, with or without desiccant, are available to as-
sure life and performance of the Corrosion Dry Air Pak.
For improved MIC and oxygen corrosion protection,
Potter Pipe-Shield™ should be used to coat the inside
of the sprinkler system
PRICING LISTED BELOW
Approvals:
Air Maintenance Device: UL Listed, FM approved
Service Pressure: Supplies 40 - 100 psig to sprinkler
system
System Outlet: ½” FNPT
Environmental Specifi cations: 50°F to 100°F
Power Requirements:
CDP 500 Single Phase 230V current load 8.6 amps
CDP 500 Three Phase 460V current load 4.3 amps
CDP 1000 Single Phase 230V current load 13 amps
CDP 1000 Three Phase 460V current load 6.5 amps
CDP 2000 Single Phase 230V current load 13 amps
CDP 2000 Three Phase 460V current load 6.5 amps
System Capacity: CDP 500 - 500 gallon / CDP 1000 –
1000
gallon / CDP 2000 – 2000 gallon
Compressor HP: CDP 500 - 2 HP / CDP 1000 - 5 HP
CDP 2000 - 5 HP
Dryer CFM Rating: CDP 500 – 10 CFM / CDP 1000 – 20
CFM / CDP 2000 – 27 CFM
Approximate Shipping Weight: CDP 500 – 375 lbs / CDP
1000 – 500 lbs. / CDP 2000 – 550 lbs.
Prices
Listed Below
|
PART#
|
Description
|
List Price
|
Web Price
|
|
1119726
|
CDP 500 Single Phase 120V
|
$16,000.50 |
$9,240.00
|
|
1119727
|
CDP 500 Single Phase 208V
|
$16,000.50 |
$9,240.00
|
|
1119728
|
CDP 500 Single Phase 230V
|
$16,000.50 |
$9,240.00
|
|
|
|
|
|
|
1119730
|
CDP 500 Three Phase 208 V
|
$15,714.50 |
$9,129.00
|
|
1119731
|
CDP 500 Three Phase 230V
|
$15,714.50 |
$9,129.00
|
|
1119732
|
CDP 500 Three Phase 460V
|
$15,714.50 |
$9,129.00
|
|
1119733
|
CDP 500 Three Phase 575V
|
$15,714.50 |
$9.129.00
|
|
|
|
|
|
|
1119735
|
CDP 1000 Three Phase 208V
|
$17,141.75 |
$10,131.00
|
|
1119736
|
CDP 1000 Three Phase 230V
|
$17,141.75 |
$10,131.00
|
|
1119737
|
CDP 1000 Three Phase 460V
|
$17,141.75 |
$10,131.00
|
|
1119738
|
CDP 1000 Three Phase 575V
|
$17,141.75 |
$10,131.00
|
|
|
|
|
|
|
1119740
|
CDP 2000 Three Phase 208V
|
$18,285.75 |
$11,233.00
|
|
1119741
|
CDP 2000 Three Phase 230V
|
$18,285.75 |
$11,233.00
|
|
1119742
|
CDP 2000 Three Phase 460V
|
$18,285.75 |
$11,233.00
|
|
1119743
|
CDP 2000 Three Phase 575V
|
$18,285.75 |
$11,233.00
|
|
|
|
|
|
|
|
|
|
|
Products may be discontinued without notice. Other disclaimers may apply.
