S7605C 5kW Compact FM Transmitter
The
S7605C Compact FM transmitter 5kW
is an evolution of the highly modular
architecture for which Eddystone Broadcast
transmitters are legendary. The
use of new higher efficiency 300W hot-pluggable Power
Amplifier modules
means that removal of amplifiers can be carried out
with minimal reduction in
output power. The design additionally features
hot-pluggable switched mode
power supplies which also provide ease of servicing.
Both PA and SMPSU modules are common to the entire
7600 range from
500W to 20kW, resulting in greatly reduced spares
holding costs for networks
and groups.
Power Output
|
5kW (Adjustable to -6dB)
|
Operating Frequency
|
87.5 to 108 MHz
|
RF Output Load Impedance
|
50 ohm unbalanced
|
RF Output Connector
|
1-5/8" EIA
|
Maximum VSWR
|
Able to maintain full power at 1.5:1 before
protection cuts in
|
Mains Power Supply
|
Single or Three phase 176-264V
|
RF Harmonic Output
|
Better than or equal to -79dBc
|
Power Factor
|
Typically 99%
|
Ambient Temperature Range
|
0°C to +55°C at an altitude up to 3000M
|
Overall Efficiency
|
Typically 63%
|
System Overview
The drive input is fed to an internal 16 way splitter which provides the PA module input drive. Each E2021 Power amplifier uses dual packaged MOSFET's mounted on a substantial heatsink assembly with minimum airflow over RF components. DC power is fed to the RF modules from the 8 switched mode power supplies. Internal control and self protection in case of reverse power, excess current or over temperature is handled within each individual E2021 power amplifier module with all monitoring being microprocessor derived. Each module transmits its internal parameters to the central transmitter controller/monitor (E2023) and parameters are displayed on an easy to read backlit LCD screen.
The S7605C transmitter has self contained redundant cooling fans mounted on the rear of the transmitter. This cooling
system can be ducted if required and bespoke systems can be provided to meet special requirements.
The S7605C Compact FM transmitter 5kW
is an evolution of the highly modular
architecture for which Eddystone Broadcast
transmitters are legendary. The
use of new higher efficiency 300W hot-pluggable
Power Amplifier modules
means that removal of amplifiers can be carried
out with minimal reduction in
output power. The design additionally features
hot-pluggable switched mode
power supplies which also provide ease of
servicing.
Both PA and SMPSU modules are common to the
entire 7600 range from
500W to 20kW, resulting in greatly reduced
spares holding costs for networks
and groups.
Features
Compact Amplifier and PSU Modules are replaceable On Air
Uses Eddystone’s patented N way combiner system
Fully compliant with ETS 300 384 specification for FM transmitters
Easily configured into a wide range of system architectures
Uses highly efficient SMPS power supplies with PF correction
Comprehensive remote control and monitoring facilities
LCD display ensures easy local monitoring
Toll Free: 1-800-843-6036
Office: 336-766-1386
email: midsouthcable@yahoo.com
email: midsouthcable@gmail.com
Web: www.midsouthelectronics.com
Web: www.midsouthcable.com
Web: www.midsouthglobal.net
Web: www.inetparts.com
Web: www.ruggednetworks.net
Web: www.webnetcable.com
Web: www.webelectrical.net
Web: www.midsouthlighting.com

http://www.facebook.com/MidSouthWireCableCompany